• Follow us

Product Categories

Dywer Series PE & TE Orifice Plate Flowmeters

Dywer Series PE & TE Orifice Plate Flowmeters

The Dwyer Series PE Orifice Plate Flowmeter offers one-piece PVC construction incorporating a unique holder or carrier ring containing metering taps and integral gaskets

Description

Welcome to purchase discount source dywer series pe & te orifice plate flowmeters from our company, which is one of the best China dywer series pe & te orifice plate flowmeters manufacturers and suppliers.

The Dwyer Series PE Orifice Plate Flowmeter offers one-piece PVC construction incorporating a unique holder or carrier ring containing metering taps and integral gaskets. Unlike a standard orifice plate, the Series PE Orifice Plate Flowmeters is a true primary element including the various components for differential pressure measurement. It was designed for use wherever there is an application for a conventional flow orifice plate. Orifice flow meter can also be used in place of other primary differential producers for efficiency and cost effectiveness. The Series PE orifice flow meter is available in line sizes from 1/2" to 24"and used for air and most gases. It meets or exceeds ASME, AGA & ISO standards.

The Series TE Orifice Plate Flowmeter offers one-piece PTFE construction similar to the OP and PE Series orifice plates, which incorporate a unique holder or carrier ring containing metering taps and integral gaskets. 

Available for line sizes from 1/2" to 24", the Series TE orifice plate can be used with gases, liquids, corrosive, and high temperature fluids. The Series TE can be easily installed by slipping the unit between standard flanges (orifice flanges are not required). The Series TE orifice flow meter was designed for use anywhere there is an application for a conventional flow orifice plate. It can also be used in place of other primary differential producers for efficiency and cost effectiveness.

Product Applications

•    Fluid flow rates in building water lines

•    Boiler feedwater

•    Cooling water

•    Combustion or compressed air

•    Steam flow


Specifications


Service:



PE: Clean air and compatible gases; TE: Compatible gases and liquids.



Wetted Material:



Monolithic (single piece) constructed entirely of gray PVC for PE or white PTPE for TE, Buna-N gaskets.



Accuracy:



±0.6% full scale flow. (Beta= .2-.6) ±0.7%   for Beta greater than .6.


Temperature Limits:



PE:140°F (60°C) max; TE: -40 to 200°F (-40 to 93.3°C).


Pressure Limits:



150 psi (10 bar) max


Head Loss:



1 - Beta ratio², eg: 1 - 07² = 1 - 0.49 = 51%   of the d.p.


Line Sizes:



1/2" to 24".


Process Connections:



1/4" female NPT.


Installation:



Standard flange125#/150# rating.


Pipe Requirements:



General requirements 10 diameter upstream and 5 diameter downstream.


Weight:



Varies with line size. See Catalog page.

If you have more interest, please send  your valuable inquiry to this email: postmaster@wtindustrialeqpt.com or visit http://www.wtindustrialeqpt.com/flow-meter/ for more information.

Related Products

Feedback